TechLogix TL-A70-40W Audio mixer/amp for overflow audio
Audio mixer/amp for overflow audio – 40W. The TL-A70-40W provides 40 watts of power and four audio inputs (a microphone input, two analogue stereo line inputs), and a digital audio input (typically a CD player, streaming audio player, or other media player). You can select from any of the three line inputs, and mix it with the microphone together into a single audio stream. That audio stream can be broadcast to multiple speakers simultaneously.
Description
Audio mixer/amp for overflow audio
Most of us are familiar with connecting speakers to a stereo system: you pull the two conductor speaker cable, connect the red wire to the red terminal on the amp, connect the black wire to the black terminal on the amp, repeat on the right speaker, and then repeat on the left speaker. It’s all pretty simple and straight forward, and it works great for stereo audio in a single room.
But what do you do when you need to distribute audio to speakers in multiple areas? Or if the application won’t really support left and right stereo audio? That’s where a 70/100 volt system comes in!
70/100v amplifiers have a higher signal voltage than conventional stereo audio amplifiers (commonly referred to as 8 Ohm systems) and allow for more speakers and longer signal distances. This is ideal for any room or building requiring more than two speakers. These systems are commonly used in paging or background music applications, but are a great way to distribute audio anywhere using a very simple wiring concept.
The TL-A70-40W provides 40 watts of power and four audio inputs (a microphone input, two analogue stereo line inputs), and a digital audio input (typically a CD player, streaming audio player, or other media player). You can select from any of the three line inputs, and mix it with the microphone together into a single audio stream. That audio stream can be broadcast to multiple speakers simultaneously.
Technical Features
– (1) Mic/Line input
– (1) Stereo audio input
– (1) Digital audio input
– Auto-ducking on the mic channel
– Microphone mixing with source audio
– 48 dB of microphone gain with phantom power
– 4 dB of line gain
– 40W Class D amplification
– 70V or 100V output
– Front panel, IR & RS232 control
– Built-in EQ
I/O Connections
Analog Inputs Two 2) RCA jack, One (1) 3.5mm TRS jack
Digital Input One (1) optical jack
MIC Input One (1) 3-pin captive screw connector/3.81mm
IR Input One (1) 3.5mm TRS Jack
RS232 Control One (1) 3-pin captive screw connector/3.81mm
RS232 ID Selector One (1) 16 ID codes for control
Button Control (Front Panel) Five (5) buttons in total
MIC Signal Type Selector One (1) 3-position slider switch
70V or 100V amplifier Output One (1) 3-pin captive screw connector/3.81mm
DC 24V Power One (1) Power connector with locking screw (5.5mm outside
diameter, 2.1mm inside diameter)
Audio Performance
Input Impedance >10k Ω
Output Type Constant voltage 70V or 100V
Maximum Rated Power Output 40 Watts
Frequency Response 120 Hz ~ 20 kHz
Common Mode Rejection Ratio (CMRR) >70 dB at 20 Hz ~ 20 kHz
Signal to Noise Ratio (SNR) 80 dB (Max)
Total Harmonic Distortion +
Noise (THD+N)
1% at 1 kHz; 0.3% at 20 kHz at Nominal Level
Voltage Gain 26 dB
Chassis and Environmental
Enclosure Painted aluminum
Dimensions (W x H x D) 130mm x 44mm x 144mm (5.12in x 1.73in x 5.67in)
Shipping Weight 1.10Kg (2.43lbs)
Operating Temperature
(Environment)
-10° ~ +40° C (+14° ~ +104° F)
Operating Temperature
(Chassis)
45° C (113° F)
Operating Humidity
(Environment)
10% ~ 90% Non-condensing
Storage Temperature
(Environment)
-15° ~ +70° C(+5° ~ +158° F)
Storage Humidity (Environment) 10% ~ 90% Non-condensing
Power, ESD, Regulatory
Maximum Power Consumption 45W
Power Supply DC 24V at 2.5A
ESD Protection 15KV
Regulatory CE, FCC
Other
Standard Warranty 1 Year
Indicators 1 Power, 2 Input Select ,4 Signal select, 1 Up, 1 Down, 1 Mute
Included Items Installation guide, Power adaptor, Mounting ears (2 ea),Mounting screws(4 ea), RS232 cable, Plastic cushions (4 ea), Pluggable terminal
black
